Product ID:SCOTCH WELD TM 1838 B EPOXY ADHESIVE
MSDS Date:12/01/1992
FSC:8040
NIIN:00-180-5941
Kit Part:Y
MSDS Number: BQYBR

3/M

3/M CENTER
ST. PAUL, MN 55144-1000
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 612-733-1110 / 714-864-2310

Preparer: C.A. EISENHARD

Cage: 76381

MINNESOTA MINING AND MFG CO, DBA 3M

SAINT PAUL, MN 55144-1000 US

Telephone: 866-556 5712 / 612-733-1110

Cage: 76381

EPOXY RESIN

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: 70-80%

KAOLIN

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 20-30%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST; 9293

CLAY

CAS: 68953-58-2

RTECS: UZ2996400

Fraction By Weight: 1-5%

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

Fraction By Weight: 1-5%

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 0.1-1.0%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:NONE
Effects of Overexposure:EYE: IRRITATING UPON DIRECT CONTACT. SKIN:
IRRITATION TO SKIN ON REPEATED CONTACT, SENSITIZATION. INHALATION:
IRRITATING TO NOSE AND THROAT. INGESTION: DIGESTIVE SYSTEM
IRRITATION.
Medical Cond Aggravated by Exposure:NONE

First Aid:EYE: FLUSH EYES WITH WATER FOR AT LEAST 10 MINUTES, CALL
PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE TO
FRESH AIR. INGESTION: DO NOT INDUCE VOMITING. SEEK MEDICAL
ATTENTION.

Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF-CONTAINED
BREATHING APPARATUS WHEN FIGHTING FIRES INVOLVING THIS MATERIAL.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:VENTILATE THE AREA. COLLECT SPILLED MATERIALS.
PLACE IN A DOT APPROVED METAL CONTAINER.

Handling and Storage Precautions:STORE IN COOL DRY AREA. KEEP OUT OF
REACH OF CHILDREN. KEEP CONTAINER CLOSED WHEN NOT IN USE. LAUNDER
CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:PRODUCT CONSISTS OF TWO COMPONENTS. PRECAUTIONS FOR
EACH PART MUST BE OBSERVED WHEN SEPARATE OR MIXED. AVOID EYE
CONTACT OR BREATHING DUST FROM GRINDING, SANDING, OR CUTTING
OPEATIONS ON CURED PRODUCT . PREVENT CONTACT WITH SKIN AND EYES.

Ventilation:VENT. IF CONFINED AREA, PROVIDE LOCAL EXHST. VENT CURING
OVEN TO OUTSIDE/EMMISION CONTROL DEVICE. DONT RECIRCULATE AIR.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING, QUICK DRENCH SHOWER,
EYE WASH FOUNTAIN.
Supplemental Safety and Health

HCC:N1
Spec Gravity:1.300 GM/ML
Viscosity:PASTE
Solubility in Water:VERY SLIGHT
Appearance and Odor:WHITE, VISCOUS PASTE, LITTLE ODOR
Percent Volatiles by Volume:0.00

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:HCL, CO, CO2 AND SMOKE PARTICLES WHEN
SUBJECTED TO EXCESSIVE HEAT OR FLAMES.

Waste Disposal Methods:MIX PART A WITH PART B. COMPLETELY CURE &
DISPOSE OF FULLY CURED WASTE PRODUCT IN SANITARY LANDFILL.
INCINERATE UNCURED BULK PRODUCT AFTER MIXING WITH FLAMMABLE
MATERIAL IN INDUSTRIAL COMMERCIAL FACIL ITY. DISPOSE IN ACCORD
W/APPLICABLE REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.